Our VP tool-less guide rods are CNC machined from both stainless steel & tungsten, with a stainless steel reverse plug. Suitable for 1911/2011 platforms, they are a great upgrade allowing very easy disassembly for cleaning. The tungsten guide rod provides additional weight to the front of your pistol, helping reduce recoil.
Select options
This product has multiple variants. The options may be chosen on the product page
Nano Technology Firearm Lubricant - Cleans, Lubricates & Protects! Tested and proven Military grade.
Ideal for use on: Rifles, shotguns, handguns, air guns and rifles, target guns, trigger mechanisms, machine guns, magazines through to heavy armaments as well as enhancing ballistics to virtually eliminate any seizing. Safe on silicone and butyl rubbers, non dieseling when dry.
Can be used on all metal frictional surfaces. Other uses include drilling, tapping, rollers, bearings, hinges through to protecting bare metal.
Works in all seasons and environments hot or cold, wet or dry and on all equipment from light to heavy arms including projectiles. Temperature range ws2 -273°C to 650°C(-460°F to 1,200°F). Safe to use on polymers, plastics & dressed timbers. Repels water, moisture & is hydrophobic.
The Nanoguard Extremelife fortified formulation contains a unique new globally patented spherical tungsten nanotechnology able to withstand 100,000 PSI . The nano particles penetrate the surface of metal, producing an ultra-low friction durable protective nano-barrier that significantly reduces corrosion, heat & extends armaments life.
Select options
This product has multiple variants. The options may be chosen on the product page
This dual purpose tool helps install the charging handle and remove the extractor in a Ruger 10/22 and Ruger Charger.
Most of us have struggled with re-installing the charging handle and spring under the bolt in a Ruger 10/22. This tool solves the problem of properly aligning the bolt and charging handle when you take the Ruger 10/22 down fully, making this a simple few minute task. It can also be used to remove the extractor & spring which is big help when replacing a broken extractor or doing a deep clean.
This tool is the answer to making disassembly & re-assembly for regular maintenance and cleaning so much easier.
100% Australian made from 6060 aluminium with stainless steel pins.
Victor Precision VP25-.22 Magnum/.17 HMR magazines & VP15 - .22 Magnum/.17 HMR magazines.
Designed and manufactured in Queensland - 100% Australian made!
These magazines are CNC machined from Acetal, a hard engineering, lightweight plastic with high tensile strength and rigidity for use in components where exceptional strength is needed. The lips of the magazines are made from 7075 Aluminium which has excellent mechanical properties and exhibits good ductility, high strength, toughness, and great resistance to fatigue.
Suitable for use in the following: Ruger American, Ruger Precision, Ruger 77 & Volquartsen Semi Auto.
The 25 Round Magazines are a prohibited item in the following states: NSW, ACT, Victoria unless you are a Category D license holder or an Occupational Category H license holder.
Select options
This product has multiple variants. The options may be chosen on the product page
Victor Precision VP -.22LR magazines. Designed and manufactured in Queensland - 100% Australian made!
These magazines are CNC machined from Acetal, a hard engineering, lightweight plastic with high tensile strength and rigidity for use in components where exceptional strength is needed. The lips of the magazines are made from 7075 Aluminium which has excellent mechanical properties and exhibits good ductility, high strength, toughness, and great resistance to fatigue.
Compatible with: Ruger American, Ruger Precision, Ruger Charger, Christensen Arms, Ranger 22, PWS/Volquartsen Straight Pull plus more. Not compatible with 10/22 rifles.
The 25 Round Magazines are a prohibited item in the following states: NSW, ACT, Victoria unless you are a Category D license holder or an Occupational Category H license holder.
Check out this awesome video from Ozzie Reviews:
https://youtu.be/D1bjGhlYNKw
Select options
This product has multiple variants. The options may be chosen on the product page
The Victor Precision +5 magazine extension base pad for the Magpul PMAG magazines is CNC machined from Actel, a hard engineering, lightweight plastic with high tensile strength and rigidity.
The .223/5.56 has a total weight of just 28g, this extension and will allow you to add an extra 5 rounds to your Magpul AR/M4 PMAGS. Just remove your current base pad & plate and fit the extension base pad onto your magazine.
The .308/7.62 has a total weight of 20g Just remove your current base pad & slide the extension base pad onto your magazine. This extension will not spring bind on 20 or 25 round magazines.
Please check your state's regulations as to whether you're permitted to use these.
Compatible with Gen 2 & 3 magazines in .223/5.56 x 45 and .308/7.62.
Manufactured in Queensland - proudly Australian made.
Select options
This product has multiple variants. The options may be chosen on the product page
The Victor Precision Stoeger M3000 Charging Handle is made from hardened and tempered 4140HT steel. It has a tough black PVD coating, that is suitable for the most extreme conditions. The aggressive serrated pattern is comfortable yet provides a snag free operation (perfect for gloved hands) and all edges are de-burred.
This product is of the high quality that you would expect from Victor Precision - 100% Australian made.
Dimensions: 31mm long x 12mm diameter (overall length 64mm). Weight: 22g.
The Victor Precision Sulun Tac-12/Benelli M4 Charging Handle is made from hardened and tempered 4140HT steel. It has a tough PVD coating, a non reflective matte black, that is suitable for the most extreme conditions. The aggressive serrated pattern is comfortable yet provides a snag free operation (perfect for gloved hands) and all edges are de-burred.
This product is of the high quality that you would expect from Victor Precision - 100% Australian made.
Dimensions: 28mm long x 12mm diameter (overall length 65mm). Weight: 16g.